How to prevent and remove paver stains
September 21, 2018
We love concrete products because of their combination of beauty and durability. Still, sometimes, you find marks on your pavers and wonder where they came from. We’re here to clarify! Read below to discover where the mysterious paver stains are coming from and our preventative measures to avoid them.
Natural paver stains
By natural stains we mean, residues left by the natural environment from things such as moss and tree leaves.
Moss develops with long periods of humidity and is made worse when the surface has no direct sun exposure. To avoid it, cut the shrubs and branches that create unnecessary shade.
If moss has already developed, start by removing it with a pressure washer. You can also try scrubbing the surface with a broom or a scrub brush.
Pro tip : Be careful not to scrub too hard to leave scratch marks on the pavers.
- Petals and fallen leaves
In autumn, fallen leaves may land on your pavers and can leave behind brown-ish stains. Since concrete is porous it easily absorbs the pigments in flowers and leaves. It is important to regularly broom the surface to avoid these paver stains, especially before the winter season arrives.
Rust stains do not have anything to do with the quality of the concrete products. In fact, rust stains are caused by steel and/or fertilizers.
- Drops of rusted water
You’ll notice, once you move your outdoor furniture drops of rusted water will damage the surface of your pavers quickly. If this happens, hose down the drops of rust with water immediately to avoid it from staining permanently.
Also, be sure to clean your gutters, add an extension, and properly position it to avoid draining of dirty water on your pavers.
- Streaks of metal
The dragging of metal objects on the surface of your pavers can leave rust colored streaks. When winter comes, avoid metal shovels; Choose small plastic shovels instead.
Pro tip: verify that your snow removal company uses the appropriate equipment with Teflon protection. For more information on preparing your pavers for winter check out this post.
- Fertilizer spots
Fertilizers contain iron, which is what causes the rust effect on concrete products. So, if you notice round rust-colored spots after the application of fertilizer on your grass, you now know where it comes from! It’s important to remove the fertilizer particles with a broom immediately after it is applied to avoid them from expanding and creating paver stains.
To clean all the rust stains mentioned above, you can apply a rust remover.
Oil and Grease stains
Oil and grease paver stains can be tough.
- Motor oil
If you notice that your car is leaking, it is recommended to quickly clean the pavers with a de-greaser to avoid the stains soaking in. The faster you catch the leak, the more likely it is to be removed.
During BBQ season, it’s possible for grease stains to end up around your outdoor kitchen area. To clean these paver stains, you can apply some dish soap. For the tougher stains, use a degreaser that dissolves, captures and removes the stains.
There are oil and grease stain removers available.
Its not rare for tire tracks to end up on driveway pavers. They’re especially visible on light-colored pavers. To easily remove the rubber marks, brush the surface and then clean with the help of a pressure-washer. If that doesn’t work, apply rubber and paint stain remover.
It is important to use de-icing salts BEFORE ice has formed on the surface. Do not use de-icing salts AFTER ice has already formed as it can cause the erosion of the surface of your pavers. It is strongly recommended to use gravel or sand for icy areas.
To try to avoid all the paver stains mentioned above, you can apply a product sealer specially created to protect your pavers. Its made to halt the penetration of contaminants and facilitate the maintenance of pavers.
In hopes that these tips will help you preserve the natural beauty of your pavers!
*We recommend to always test cleaning products on a small section of your pavers before applying it to the entire surface. Follow the instructions of the manufacturer.
**Equivalent product cleaners and sealers can be found at your local hardware store.